ProWalk Leadshank Walker – 6 Horse Walker

  • Manufacturers of walkers with uncompromised quality
  • Designed for maximum safety of both horse and horsemen
  • Prowalks unique belt drive system retains over 98% of its power
  • Energy efficient
  • True variable speed with reverse
  • Does not require an electrician and runs off a standard 110 outlet
  • Our walkers were designed and made for top performing athletic horses
  • Our divider gates do not shock your horses to move.
  • Our panels are built in a way that have proven to earn the respect from horses and motivates them more naturally than jigging them.
  • Lead shank quick release on all lead shank models
  • We offer installation services
  • Simplified control box for ease of use
  • Made in the USA
***Ask about our factory preferred installation on walkers

Electrical Wiring:

Priefert walkers run on 240 VAC. You will need to install a double pole 30 AMP breaker. You will need 4-Number 10 wires coming out of the breaker box to the location you would like your control box. This will be single phase. From the control box to the walker base you will need 7 wires. 4- number 10 and 3-number 12. Please have your electrician call me directly at time of wiring installation. It is best to run the conduit up through the center of the concrete base.

Control Box Mounting:

You will need to decide where you would like to install your control box. It is best to mount the control box beside the location you would like you gates or to the barn that you will be walking out with the horses. If you are going to mount it on post, they will need to be set on 18″ centers.

Box Measurement:

The bolt pattern is 18″ wide center to center and 25 ¼” tall center to center. It is a 7/16″ hole so I would recommend 5/16″ or 3/8″ bolts to mount with.

The actual box is 24″ tall, 20″ wide, and 13″ deep.

The mounting tabs from end to end are 26 ½” tall.

I would suggest the center of this box to be 54″ from the ground

Concrete Pad:

We recommend a 60″ wide square that is at least 1’ deep. I will send you a pre-built anchor bolt kit that will need to be placed in the center of the concrete. The bolts will need to be sticking out of the concrete at least 1’ 1/2, this will allow plenty of threads to secure the walker down.

Dirt Work:

The next step will be prepping your ground around the walker. Please add at least 2 feet outside of the stated size of the walker. Example, 6-50 horse will have a 52 foot foot print, it will need 56 foot pad. Please note that the round pens will sit directly onto the ground. The walker however will be level with the world when it is installed. So if there is any drop to the ground you will be able to see it. If you are going to use a footing in the walking path you can add some dirt after the walker is installed in the track. However any base layer desired will need to be installed at this point.

Equipment:

You will need to provide a piece of equipment that has a front in loader with forks. It needs to be big enough to handle 2000 LBS. This is very important for the safety of your walker and the people installing the walker.

Get A QuoteCall NowGet Financing

Get a Quote

MODEL # of ARMS SPEEDS ARM HEIGHT ARM LENGTH DRIVE SYSTEM PRICING*
261-17 6 One 9′ 17 ft Double $10,195
263-17 6 Variable 9′ 17 ft Double $11,295
263-17HD 6 Variable 9′ 17 ft Double $12,095
261-21 6 One 9′ 21 ft Double $12,395
263-21 6 Variable 9′ 21 ft Double $13,895
FREE STYLE UPGRADE FOR 263-21 Divider Gates Arm Extensions $10,995

Please note to add back freight to retail pricing — all pricing will be freight on board(F.O.B.) from Ada, Oklahoma. User will provide proper base for walker, preferably concrete, with proper bolts to secure base of walker. Electronic variable speed machines are pre-wired, with 55′ usable control cable from the controller to the machinge, 110V AC 20 AMP power required. Power cannot be GFI. Reverse is standard on all variable speed machines.

QUALITY COUNTS
  • Prowalk walkers are virtually indestructible
  • Preferred by top trainers all over the world
  • Lifetime chassis warranty to original purchaser when properly maintained
  • Only three easy access fittings to be serviced
  • A dependable walker for years of trouble-free service
  • The best value horse walker in America
PROFESSIONALS CHOICE
  • 14 Lead shank models available
  • Heavy duty 4 horse
  • Heavy duty 6 horse
  • Free style machines
  • 4 Horse - 54'
  • 6 Horse - 54'
  • 6 Horse - 70'
  • Variable speed control
FEATURES
  • Completely enclosed base with metal covers
  • Replacement parts in stock for any Prowalk Walkers built since 1984
  • Easy access for servicing
  • 31', 35' or 43' diameter, depending on model
  • Extra heavy-duty frame, head, and arms
  • Arm quick release safety cable
  • Fully primed and painted distinctive prowalk blue
  • Reversible 2 HP and  2.5 HP motor, 110 volt AC pre-wired, no electrician needed
  • Customized power switch location
  • Competitively priced