Shop | Kiser Ranch Development

Arena Drags

8000 Series

With over 35 years in the arena drag business, Kiser Arenas has the experience and knowledge to design the components necessary to create your perfect footing. Designed for a standard or smaller tractor, The Kiser 8 Series Drag is unlike any other drag on the market.

Although this drag is 10‘ wide it only requires a 45HP tractor. It has two sets of hydraulic remotes – the first is a hydraulic leveling blade and the second set is to customize the drag depth.

On the front of the drag there is a stationary push blade that begins the footing releveling process. The blade runs about 1/2” to 1” in the ground and is the initial point of contact. Behind that, the second point of contact, there is a row of adjustable rippers that can be raised or lowered and pinned in place to loosen compacted footing at the desired depth. The third point of contact is a hydraulically controlled leveling blade/grooming blade. This blade can be used as a stationary leveling blade or it can be controlled to move arena footing and easily keep your arena footing at a constant depth.

Behind the leveling blade/grooming blade, the drag can be customized with either an adjustable profile blade or alternately, two rows of adjustable grooming rods. Finally, a finish rake gives the arena the final look and finish.

Most of our customer add the optional 225 gallon water system to The Kiser 8 Series Drag. The water system is designed to spray water in front of the drag instead of behind the drag. This allows the moisture to be worked into the footing versus having it sit on top of the footing. The water is distributed via a PTO driven pump that connect directly to the tractor.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Arena Drags

2000 Series

The Kiser 2 Series Arena Drag is the most adaptable small tractor drag we have ever designed. The drag is 8’ wide and can be used as either a pull type drag or a 3 point drag simply by removing the tongue. This drag is an ideal solution for smaller tractors or tighter spaces where a 10’ wide drag cannot be used.

It features one set of hydraulic remotes for depth control when used as a pull type drag. When the drag is used as a 3 point drag, the depth can be set with an adjustable top link.

It has a set of rippers on the front of the drag, with replaceable ripper tips that can be adjusted for depth. Behind the rippers, there are two rows of replaceable grooming rods, which can also be adjusted for depth. At the rear of the frame, there are two options available. Either a profile blade or two additional rows of grooming rods, depending upon application. Finally, a finish rake gives the arena the final look and finish.

The drag is now also available with a leveling blade for the front of the drag to skim the arena and keep the footing level as you drag.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Industrial Ceiling Fans

AirVolution – D3

The three-blade design of the AirVolution-D3 reduces weight, friction, and raw materials, which in turn minimizes the strain on the building, your energy consumption, and your budget. But can three blades do the job? Yes! Just link a wind turbine, we designed the AirVolution-D3 to be the optimal balance between weight, materials, and efficiency.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Industrial Ceiling Fans

MacroAir Z Series Industrial Ceiling Fans

The ultimate utility fan, the MacroAir Z Series industrial fan uses tried and true technology which is proven to last over time. The Z Series uses a reliable gearbox-driven power unit to provide huge airflow at a great value. With basic features and accessories, the Z series industrial fan will meet any budget while performing better than any fan in its class.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Industrial Ceiling Fans

MacroAir Y Series Industrial Ceiling Fans

The MacroAir Y Series uses a proven industrial gearbox-driven power unit in combination with integrated network technology. Combine with one of our multi-fan network controllers, AirEffect temperature control, or AirLynk for Building Management Systems for advanced control. With a premium industrial gearmotor and advanced control platforms, you get more than a fan, you get one of the most versatile cooling solutions on available on the market.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Industrial Ceiling Fans

MacroAir Series X Industrial Ceiling Fans

This fan boasts a bullet-proof, industrial-grade, direct drive motor/controller platform more powerful and far superior than any fan before. The X-series is a true workhorse that can endure the harshest industrial environments without breaking a sweat, while the silent operation and sleek design features make it an excellent choice for even the chicest of spaces.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Priefert Horse Walkers

Priefert Panel Walker – 4 Horse Walker

This is the most advanced horse walker on the market. Horses work most naturally and comfortably without resistance, which helps them to stay mentally engaged for a more complete conditioning program. Priefert horse walkers are great for warming up (in place of longeing), cooling down, rehabbing from illness and injury, and staying in top shape without the concern of learning bad habits from different riders.

Priefert raises the bar for panel walkers by eliminating the need for maintenance and increasing performance and reliability! We know other brands of walkers that result in squealing belts and derailed chains, and walkers that have turned into sedentary tie posts. With the revolutionary use of the planetary gearbox, Priefert brings you a low-maintenance, high-performing, whisper-quiet, and super-reliable tool!

We offer installation services

***Ask about our factory preferred installation on walkers

Electrical Wiring:

Priefert walkers run on 240 VAC. You will need to install a double pole 30 AMP breaker. You will need 4-Number 10 wires coming out of the breaker box to the location you would like your control box. This will be single phase. From the control box to the walker base you will need 7 wires. 4- number 10 and 3-number 12. Please have your electrician call me directly at time of wiring installation. It is best to run the conduit up through the center of the concrete base.

Control Box Mounting:

You will need to decide where you would like to install your control box. It is best to mount the control box beside the location you would like you gates or to the barn that you will be walking out with the horses. If you are going to mount it on post, they will need to be set on 18″ centers.

Box Measurement:

The bolt pattern is 18″ wide center to center and 25 ¼” tall center to center. It is a 7/16″ hole so I would recommend 5/16″ or 3/8″ bolts to mount with.

The actual box is 24″ tall, 20″ wide, and 13″ deep.

The mounting tabs from end to end are 26 ½” tall.

I would suggest the center of this box to be 54″ from the ground

Concrete Pad:

We recommend a 60″ wide square that is at least 1’ deep. I will send you a pre-built anchor bolt kit that will need to be placed in the center of the concrete. The bolts will need to be sticking out of the concrete at least 1’ 1/2, this will allow plenty of threads to secure the walker down.

Dirt Work:

The next step will be prepping your ground around the walker. Please add at least 2 feet outside of the stated size of the walker. Example, 6-50 horse will have a 52 foot foot print, it will need 56 foot pad. Please note that the round pens will sit directly onto the ground. The walker however will be level with the world when it is installed. So if there is any drop to the ground you will be able to see it. If you are going to use a footing in the walking path you can add some dirt after the walker is installed in the track. However any base layer desired will need to be installed at this point.

Equipment:

You will need to provide a piece of equipment that has a front in loader with forks. It needs to be big enough to handle 2000 LBS. This is very important for the safety of your walker and the people installing the walker.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Priefert Horse Walkers

Priefert Panel Walker – 6 Horse Walker

This is the most advanced horse walker on the market. Horses work most naturally and comfortably without resistance, which helps them to stay mentally engaged for a more complete conditioning program. Priefert horse walkers are great for warming up (in place of longeing), cooling down, rehabbing from illness and injury, and staying in top shape without the concern of learning bad habits from different riders.

Priefert raises the bar for panel walkers by eliminating the need for maintenance and increasing performance and reliability! We know other brands of walkers that result in squealing belts and derailed chains, and walkers that have turned into sedentary tie posts. With the revolutionary use of the planetary gearbox, Priefert brings you a low-maintenance, high-performing, whisper-quiet, and super-reliable tool!

We offer installation services

***Ask about our factory preferred installation on walkers

Electrical Wiring:

Priefert walkers run on 240 VAC. You will need to install a double pole 30 AMP breaker. You will need 4-Number 10 wires coming out of the breaker box to the location you would like your control box. This will be single phase. From the control box to the walker base you will need 7 wires. 4- number 10 and 3-number 12. Please have your electrician call me directly at time of wiring installation. It is best to run the conduit up through the center of the concrete base.

Control Box Mounting:

You will need to decide where you would like to install your control box. It is best to mount the control box beside the location you would like you gates or to the barn that you will be walking out with the horses. If you are going to mount it on post, they will need to be set on 18″ centers.

Box Measurement:

The bolt pattern is 18″ wide center to center and 25 ¼” tall center to center. It is a 7/16″ hole so I would recommend 5/16″ or 3/8″ bolts to mount with.

The actual box is 24″ tall, 20″ wide, and 13″ deep.

The mounting tabs from end to end are 26 ½” tall.

I would suggest the center of this box to be 54″ from the ground

Concrete Pad:

We recommend a 60″ wide square that is at least 1’ deep. I will send you a pre-built anchor bolt kit that will need to be placed in the center of the concrete. The bolts will need to be sticking out of the concrete at least 1’ 1/2, this will allow plenty of threads to secure the walker down.

Dirt Work:

The next step will be prepping your ground around the walker. Please add at least 2 feet outside of the stated size of the walker. Example, 6-50 horse will have a 52 foot foot print, it will need 56 foot pad. Please note that the round pens will sit directly onto the ground. The walker however will be level with the world when it is installed. So if there is any drop to the ground you will be able to see it. If you are going to use a footing in the walking path you can add some dirt after the walker is installed in the track. However any base layer desired will need to be installed at this point.

Equipment:

You will need to provide a piece of equipment that has a front in loader with forks. It needs to be big enough to handle 2000 LBS. This is very important for the safety of your walker and the people installing the walker.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Priefert Horse Walkers

Priefert Panel Walker – 8 Horse Walker

This is the most advanced horse walker on the market. Horses work most naturally and comfortably without resistance, which helps them to stay mentally engaged for a more complete conditioning program. Priefert horse walkers are great for warming up (in place of longeing), cooling down, rehabbing from illness and injury, and staying in top shape without the concern of learning bad habits from different riders.

Priefert raises the bar for panel walkers by eliminating the need for maintenance and increasing performance and reliability! We know other brands of walkers that result in squealing belts and derailed chains, and walkers that have turned into sedentary tie posts. With the revolutionary use of the planetary gearbox, Priefert brings you a low-maintenance, high-performing, whisper-quiet, and super-reliable tool!

We offer installation services

***Ask about our factory preferred installation on walkers

Electrical Wiring:

Priefert walkers run on 240 VAC. You will need to install a double pole 30 AMP breaker. You will need 4-Number 10 wires coming out of the breaker box to the location you would like your control box. This will be single phase. From the control box to the walker base you will need 7 wires. 4- number 10 and 3-number 12. Please have your electrician call me directly at time of wiring installation. It is best to run the conduit up through the center of the concrete base.

Control Box Mounting:

You will need to decide where you would like to install your control box. It is best to mount the control box beside the location you would like you gates or to the barn that you will be walking out with the horses. If you are going to mount it on post, they will need to be set on 18″ centers.

Box Measurement:

The bolt pattern is 18″ wide center to center and 25 ¼” tall center to center. It is a 7/16″ hole so I would recommend 5/16″ or 3/8″ bolts to mount with.

The actual box is 24″ tall, 20″ wide, and 13″ deep.

The mounting tabs from end to end are 26 ½” tall.

I would suggest the center of this box to be 54″ from the ground

Concrete Pad:

We recommend a 60″ wide square that is at least 1’ deep. I will send you a pre-built anchor bolt kit that will need to be placed in the center of the concrete. The bolts will need to be sticking out of the concrete at least 1’ 1/2, this will allow plenty of threads to secure the walker down.

Dirt Work:

The next step will be prepping your ground around the walker. Please add at least 2 feet outside of the stated size of the walker. Example, 6-50 horse will have a 52 foot foot print, it will need 56 foot pad. Please note that the round pens will sit directly onto the ground. The walker however will be level with the world when it is installed. So if there is any drop to the ground you will be able to see it. If you are going to use a footing in the walking path you can add some dirt after the walker is installed in the track. However any base layer desired will need to be installed at this point.

Equipment:

You will need to provide a piece of equipment that has a front in loader with forks. It needs to be big enough to handle 2000 LBS. This is very important for the safety of your walker and the people installing the walker.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

ProWalk Horse Walkers

ProWalk Leadshank Walker – 4 Horse Walker

Manufacturers of walkers with uncompromised quality
Designed for maximum safety of both horse and horsemen
Prowalks unique belt drive system retains over 98% of its power
Energy efficient
True variable speed with reverse
Does not require an electrician and runs off a standard 110 outlet
Our walkers were designed and made for top performing athletic horses
Our divider gates do not shock your horses to move.
Our panels are built in a way that have proven to earn the respect from horses and motivates them more naturally than jigging them.
Lead shank quick release on all lead shank models
Simplified control box for ease of use
Made in the USA
We offer installation services

***Ask about our factory preferred installation on walkers

Electrical Wiring:

Priefert walkers run on 240 VAC. You will need to install a double pole 30 AMP breaker. You will need 4-Number 10 wires coming out of the breaker box to the location you would like your control box. This will be single phase. From the control box to the walker base you will need 7 wires. 4- number 10 and 3-number 12. Please have your electrician call me directly at time of wiring installation. It is best to run the conduit up through the center of the concrete base.

Control Box Mounting:

You will need to decide where you would like to install your control box. It is best to mount the control box beside the location you would like you gates or to the barn that you will be walking out with the horses. If you are going to mount it on post, they will need to be set on 18″ centers.

Box Measurement:

The bolt pattern is 18″ wide center to center and 25 ¼” tall center to center. It is a 7/16″ hole so I would recommend 5/16″ or 3/8″ bolts to mount with.

The actual box is 24″ tall, 20″ wide, and 13″ deep.

The mounting tabs from end to end are 26 ½” tall.

I would suggest the center of this box to be 54″ from the ground

Concrete Pad:

We recommend a 60″ wide square that is at least 1’ deep. I will send you a pre-built anchor bolt kit that will need to be placed in the center of the concrete. The bolts will need to be sticking out of the concrete at least 1’ 1/2, this will allow plenty of threads to secure the walker down.

Dirt Work:

The next step will be prepping your ground around the walker. Please add at least 2 feet outside of the stated size of the walker. Example, 6-50 horse will have a 52 foot foot print, it will need 56 foot pad. Please note that the round pens will sit directly onto the ground. The walker however will be level with the world when it is installed. So if there is any drop to the ground you will be able to see it. If you are going to use a footing in the walking path you can add some dirt after the walker is installed in the track. However any base layer desired will need to be installed at this point.

Equipment:

You will need to provide a piece of equipment that has a front in loader with forks. It needs to be big enough to handle 2000 LBS. This is very important for the safety of your walker and the people installing the walker.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

ProWalk Horse Walkers

ProWalk Leadshank Walker – 6 Horse Walker

Manufacturers of walkers with uncompromised quality
Designed for maximum safety of both horse and horsemen
Prowalks unique belt drive system retains over 98% of its power
Energy efficient
True variable speed with reverse
Does not require an electrician and runs off a standard 110 outlet
Our walkers were designed and made for top performing athletic horses
Our divider gates do not shock your horses to move.
Our panels are built in a way that have proven to earn the respect from horses and motivates them more naturally than jigging them.
Lead shank quick release on all lead shank models
We offer installation services
Simplified control box for ease of use
Made in the USA

***Ask about our factory preferred installation on walkers

Electrical Wiring:

Priefert walkers run on 240 VAC. You will need to install a double pole 30 AMP breaker. You will need 4-Number 10 wires coming out of the breaker box to the location you would like your control box. This will be single phase. From the control box to the walker base you will need 7 wires. 4- number 10 and 3-number 12. Please have your electrician call me directly at time of wiring installation. It is best to run the conduit up through the center of the concrete base.

Control Box Mounting:

You will need to decide where you would like to install your control box. It is best to mount the control box beside the location you would like you gates or to the barn that you will be walking out with the horses. If you are going to mount it on post, they will need to be set on 18″ centers.

Box Measurement:

The bolt pattern is 18″ wide center to center and 25 ¼” tall center to center. It is a 7/16″ hole so I would recommend 5/16″ or 3/8″ bolts to mount with.

The actual box is 24″ tall, 20″ wide, and 13″ deep.

The mounting tabs from end to end are 26 ½” tall.

I would suggest the center of this box to be 54″ from the ground

Concrete Pad:

We recommend a 60″ wide square that is at least 1’ deep. I will send you a pre-built anchor bolt kit that will need to be placed in the center of the concrete. The bolts will need to be sticking out of the concrete at least 1’ 1/2, this will allow plenty of threads to secure the walker down.

Dirt Work:

The next step will be prepping your ground around the walker. Please add at least 2 feet outside of the stated size of the walker. Example, 6-50 horse will have a 52 foot foot print, it will need 56 foot pad. Please note that the round pens will sit directly onto the ground. The walker however will be level with the world when it is installed. So if there is any drop to the ground you will be able to see it. If you are going to use a footing in the walking path you can add some dirt after the walker is installed in the track. However any base layer desired will need to be installed at this point.

Equipment:

You will need to provide a piece of equipment that has a front in loader with forks. It needs to be big enough to handle 2000 LBS. This is very important for the safety of your walker and the people installing the walker.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

ProWalk Horse Walkers

ProWalk Freestyle Walker – 6 Horse Walker

Manufacturers of walkers with uncompromised quality
Designed for maximum safety of both horse and horsemen
Prowalks unique belt drive system retains over 98% of its power
Energy efficient
True variable speed with reverse
Does not require an electrician and runs off a standard 110 outlet
Our walkers were designed and made for top performing athletic horses
Our divider gates do not shock your horses to move.
Our panels are built in a way that have proven to earn the respect from horses and motivates them more naturally than jigging them.
Lead shank quick release on all lead shank models
Simplified control box for ease of use
Made in the USA
We offer installation services

***Ask about our factory preferred installation on walkers

Electrical Wiring:

Priefert walkers run on 240 VAC. You will need to install a double pole 30 AMP breaker. You will need 4-Number 10 wires coming out of the breaker box to the location you would like your control box. This will be single phase. From the control box to the walker base you will need 7 wires. 4- number 10 and 3-number 12. Please have your electrician call me directly at time of wiring installation. It is best to run the conduit up through the center of the concrete base.

Control Box Mounting:

You will need to decide where you would like to install your control box. It is best to mount the control box beside the location you would like you gates or to the barn that you will be walking out with the horses. If you are going to mount it on post, they will need to be set on 18″ centers.

Box Measurement:

The bolt pattern is 18″ wide center to center and 25 ¼” tall center to center. It is a 7/16″ hole so I would recommend 5/16″ or 3/8″ bolts to mount with.

The actual box is 24″ tall, 20″ wide, and 13″ deep.

The mounting tabs from end to end are 26 ½” tall.

I would suggest the center of this box to be 54″ from the ground

Concrete Pad:

We recommend a 60″ wide square that is at least 1’ deep. I will send you a pre-built anchor bolt kit that will need to be placed in the center of the concrete. The bolts will need to be sticking out of the concrete at least 1’ 1/2, this will allow plenty of threads to secure the walker down.

Dirt Work:

The next step will be prepping your ground around the walker. Please add at least 2 feet outside of the stated size of the walker. Example, 6-50 horse will have a 52 foot foot print, it will need 56 foot pad. Please note that the round pens will sit directly onto the ground. The walker however will be level with the world when it is installed. So if there is any drop to the ground you will be able to see it. If you are going to use a footing in the walking path you can add some dirt after the walker is installed in the track. However any base layer desired will need to be installed at this point.

Equipment:

You will need to provide a piece of equipment that has a front in loader with forks. It needs to be big enough to handle 2000 LBS. This is very important for the safety of your walker and the people installing the walker.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

ProWalk Horse Walkers

ProWalk Superior Walkers – 4 Horse Walker

Manufacturers of walkers with uncompromised quality
Designed for maximum safety of both horse and horsemen
Prowalks unique belt drive system retains over 98% of its power
Energy efficient
True variable speed with reverse
Does not require an electrician and runs off a standard 110 outlet
Our walkers were designed and made for top performing athletic horses
Our divider gates do not shock your horses to move.
Our panels are built in a way that have proven to earn the respect from horses and motivates them more naturally than jigging them.
Lead shank quick release on all lead shank models
Simplified control box for ease of use
Made in the USA
We offer installation services

***Ask about our factory preferred installation on walkers

Electrical Wiring:

Priefert walkers run on 240 VAC. You will need to install a double pole 30 AMP breaker. You will need 4-Number 10 wires coming out of the breaker box to the location you would like your control box. This will be single phase. From the control box to the walker base you will need 7 wires. 4- number 10 and 3-number 12. Please have your electrician call me directly at time of wiring installation. It is best to run the conduit up through the center of the concrete base.

Control Box Mounting:

You will need to decide where you would like to install your control box. It is best to mount the control box beside the location you would like you gates or to the barn that you will be walking out with the horses. If you are going to mount it on post, they will need to be set on 18″ centers.

Box Measurement:

The bolt pattern is 18″ wide center to center and 25 ¼” tall center to center. It is a 7/16″ hole so I would recommend 5/16″ or 3/8″ bolts to mount with.

The actual box is 24″ tall, 20″ wide, and 13″ deep.

The mounting tabs from end to end are 26 ½” tall.

I would suggest the center of this box to be 54″ from the ground

Concrete Pad:

We recommend a 60″ wide square that is at least 1’ deep. I will send you a pre-built anchor bolt kit that will need to be placed in the center of the concrete. The bolts will need to be sticking out of the concrete at least 1’ 1/2, this will allow plenty of threads to secure the walker down.

Dirt Work:

The next step will be prepping your ground around the walker. Please add at least 2 feet outside of the stated size of the walker. Example, 6-50 horse will have a 52 foot foot print, it will need 56 foot pad. Please note that the round pens will sit directly onto the ground. The walker however will be level with the world when it is installed. So if there is any drop to the ground you will be able to see it. If you are going to use a footing in the walking path you can add some dirt after the walker is installed in the track. However any base layer desired will need to be installed at this point.

Equipment:

You will need to provide a piece of equipment that has a front in loader with forks. It needs to be big enough to handle 2000 LBS. This is very important for the safety of your walker and the people installing the walker.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

ProWalk Horse Walkers

ProWalk Superior Walkers – 6 Horse Walker

Manufacturers of walkers with uncompromised quality
Designed for maximum safety of both horse and horsemen
Prowalks unique belt drive system retains over 98% of its power
Energy efficient
True variable speed with reverse
Does not require an electrician and runs off a standard 110 outlet
Our walkers were designed and made for top performing athletic horses
Our divider gates do not shock your horses to move.
Our panels are built in a way that have proven to earn the respect from horses and motivates them more naturally than jigging them.
Lead shank quick release on all lead shank models
Simplified control box for ease of use
Made in the USA
We offer installation services

***Ask about our factory preferred installation on walkers

Electrical Wiring:

Priefert walkers run on 240 VAC. You will need to install a double pole 30 AMP breaker. You will need 4-Number 10 wires coming out of the breaker box to the location you would like your control box. This will be single phase. From the control box to the walker base you will need 7 wires. 4- number 10 and 3-number 12. Please have your electrician call me directly at time of wiring installation. It is best to run the conduit up through the center of the concrete base.

Control Box Mounting:

You will need to decide where you would like to install your control box. It is best to mount the control box beside the location you would like you gates or to the barn that you will be walking out with the horses. If you are going to mount it on post, they will need to be set on 18″ centers.

Box Measurement:

The bolt pattern is 18″ wide center to center and 25 ¼” tall center to center. It is a 7/16″ hole so I would recommend 5/16″ or 3/8″ bolts to mount with.

The actual box is 24″ tall, 20″ wide, and 13″ deep.

The mounting tabs from end to end are 26 ½” tall.

I would suggest the center of this box to be 54″ from the ground

Concrete Pad:

We recommend a 60″ wide square that is at least 1’ deep. I will send you a pre-built anchor bolt kit that will need to be placed in the center of the concrete. The bolts will need to be sticking out of the concrete at least 1’ 1/2, this will allow plenty of threads to secure the walker down.

Dirt Work:

The next step will be prepping your ground around the walker. Please add at least 2 feet outside of the stated size of the walker. Example, 6-50 horse will have a 52 foot foot print, it will need 56 foot pad. Please note that the round pens will sit directly onto the ground. The walker however will be level with the world when it is installed. So if there is any drop to the ground you will be able to see it. If you are going to use a footing in the walking path you can add some dirt after the walker is installed in the track. However any base layer desired will need to be installed at this point.

Equipment:

You will need to provide a piece of equipment that has a front in loader with forks. It needs to be big enough to handle 2000 LBS. This is very important for the safety of your walker and the people installing the walker.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Conestoga Manure Spreaders

CM-25

Call 888-512-3359 or contact us online for details.

CM-25
Capacity:	20 cu. ft.	Overall Width:	47″
Number of Horses:	1 to 5	Loading Height:	30″
Overall Length:	120″	Flared Width:	36″

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Conestoga Manure Spreaders

C-50

Call 888-512-3359 or contact us online for details.

CM-50		C-50 PTO
Capacity:	38 cu. ft.	Capacity:	38 cu. ft.
Number of Horses:	4 to 6	Number of Horses:	4 to 6
Overall Length:	141″	Overall Length:	142″

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Conestoga Manure Spreaders

C-80

Call 888-512-3359 or contact us online for details.

C-80 PTO
Capacity:	58 cu. ft.	Overall Width:	65″
Number of Horses:	5 to 10	Loading Height:	36″
Overall Length:	168″	Flared Width:	48″

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Conestoga Manure Spreaders

C-125

Call 888-512-3359 or contact us online for details.

C-125 PTO
Capacity:	85 cu. ft.	Overall Width:	76″
Number of Horses:	10 to 25	Loading Height:	43″
Overall Length:	198″	Flared Width:	59″

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Conestoga Manure Spreaders

C-175

Call 888-512-3359 or contact us online for details.

C-175 PTO
Capacity:	115 cu. ft.	Overall Width:	80″
Number of Horses:	20+	Loading Height:	45″
Overall Length:	212″	Flared Width:	59″

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Priefert Horse Walkers

Priefert Lead Walker

With the snap of a lead rope and the push of a button, your horses are ready to warm up, take the edge off before riding, get daily exercise and conditioning, or cool down.
From the lead walker’s innovative safety features to the virtually no-maintenance and reliable planetary gear box, no other lead walker on the market can compete with the Priefert quality!
“Smart Lead” technology helps the walker respond to horses that pull back by temporarily pausing forward motion decreasing stress on the horse as well as the machine. The walker resumes the original set speed after the brief pause. If resistance stops forward motion for more than 60 seconds the emergency shut off kicks in.

We offer installation services

***Ask about our factory preferred installation on walkers

Electrical Wiring:

Priefert walkers run on 240 VAC. You will need to install a double pole 30 AMP breaker. You will need 4-Number 10 wires coming out of the breaker box to the location you would like your control box. This will be single phase. From the control box to the walker base you will need 7 wires. 4- number 10 and 3-number 12. Please have your electrician call me directly at time of wiring installation. It is best to run the conduit up through the center of the concrete base.

Control Box Mounting:

You will need to decide where you would like to install your control box. It is best to mount the control box beside the location you would like you gates or to the barn that you will be walking out with the horses. If you are going to mount it on post, they will need to be set on 18″ centers.

Box Measurement:

The bolt pattern is 18″ wide center to center and 25 ¼” tall center to center. It is a 7/16″ hole so I would recommend 5/16″ or 3/8″ bolts to mount with.

The actual box is 24″ tall, 20″ wide, and 13″ deep.

The mounting tabs from end to end are 26 ½” tall.

I would suggest the center of this box to be 54″ from the ground

Concrete Pad:

We recommend a 60″ wide square that is at least 1’ deep. I will send you a pre-built anchor bolt kit that will need to be placed in the center of the concrete. The bolts will need to be sticking out of the concrete at least 1’ 1/2, this will allow plenty of threads to secure the walker down.

Dirt Work:

The next step will be prepping your ground around the walker. Please add at least 2 feet outside of the stated size of the walker. Example, 6-50 horse will have a 52 foot foot print, it will need 56 foot pad. Please note that the round pens will sit directly onto the ground. The walker however will be level with the world when it is installed. So if there is any drop to the ground you will be able to see it. If you are going to use a footing in the walking path you can add some dirt after the walker is installed in the track. However any base layer desired will need to be installed at this point.

Equipment:

You will need to provide a piece of equipment that has a front in loader with forks. It needs to be big enough to handle 2000 LBS. This is very important for the safety of your walker and the people installing the walker.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Arena Drags

1000 Series

Designed by Kiser Arenas, The Kiser 1010 Arena Drag is the ultimate equine footing preparation tool. The Kiser 1010 is used to prepare and maintain the footing at more major equine events than any other drag including the AQHA World Championships, National Reining Horse Association Derby & Futurity, National Cutting Horse Association SuperStakes, Summer Spectacular & Futurity, National Reined Cow Horse Association Futurity & World Championships, American Rope Horse Futurity, National Reining Breeders Classic, 100X Reining and SouthPoint Arena & Equestrian Center in Las Vegas NV.

With over 35 years in the arena drag business, Kiser Arenas has the experience and knowledge to design the components necessary to create your perfect footing. The Kiser 1010 Arena Drag is a pull type drag with two sets of hydraulic remotes and a 500 gallon water tank that requires a tractor with at least 90HP.

The water system is designed to spray water in front of the drag instead of behind the drag. This allows moisture to be worked into the footing versus having it sit on top of the footing. The water is distributed via a PTO driven pump that connects directly to the tractor.

The 1010 has a hydraulic leveling blade on the front, two rows of replaceable grooming rods behind that and a hydraulic ripper bar in the center.

The Kiser 1010 Arena Drag can be customized with a profile blade on the back or alternately, two additional rows of grooming rods, depending upon the intended application. Finally, a finish rake gives the arena the final look and finish.

An available upgrade for the ultimate precision arena grooming is the laser level system.

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Water Tank Trailer

525 Gallon Water Tank Trailer

Starting at $185 per month for AG Trailers

Call 888-512-3359 or contact us online for details.

DOT SPEC		AG SPEC
Weight:	Dry: 1,000 lbs Loaded: 5,373 lbs	Weight:	Dry: 1,000 lbs Loaded: 5,373 lbs
Unit Dimensions:	145” L X 80” H X 84” W	Unit Dimensions:	145” L X 80” H X 84” W
Frame Construction:	5” Channel Iron	Frame Construction:	5” Channel Iron

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Water Tank Trailer

1,010 Gallon Water Tank Trailer

Starting at $285 per month

Call 888-512-3359 or contact us online for details.

DOT SPEC		AG SPEC
Weight:	Dry: 1,980 lbs Loaded: 10,383 lbs	Weight:	Dry: 1,980 lbs Loaded: 10,380 lbs
Unit Dimensions:	218” L X 80” H X 84” W	Unit Dimensions:	218” L X 80” H X 84” W
Frame Construction:	6” Channel Iron	Frame Construction:	6” Channel Iron

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Water Tank Trailer

1,315 Gallon Water Tank Trailer

Starting at $385 per month

Call 888-512-3359 or contact us online for details.

DOT SPEC		AG SPEC
Weight:	Dry: 2,360 lbs Loaded: 13,700 lbs	Weight:	Dry: 2,360 lbs Loaded: 13,700 lbs
Unit Dimensions:	201” L X 97” H X 84” W	Unit Dimensions:	201” L X 97” H X 84” W
Frame Construction:	6” Channel Iron	Frame Construction:	6” Channel Iron

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Water Tank Trailer

1,610 Gallon Water Tank Trailer

Starting at $570 per month

Call 888-512-3359 or contact us online for details.

DOT SPEC		AG SPEC
Weight:	Dry: 3,260 lbs Loaded: 16,860 lbs	Weight:	Dry: 3,260 lbs Loaded: 16,860 lbs (water)
Unit Dimensions:	223” L X 101” H X 85” W	Unit Dimensions:	223” L X 101” H X 92” W
Frame Construction:	7” Channel Iron	Frame Construction:	7” Channel Iron

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Water Tank Trailer

2,010 Gallon Water Tank Trailer

Starting at $635 per month

Call 888-512-3359 or contact us online for details.

		AG SPEC
		Weight:	Dry: 3,260 lbs Loaded: 20,000 lbs(water)
		Unit Dimensions:	223″ L x 101″ W x 92″ H
		Frame Construction:	7” Channel Iron

Get A Quote Call Now View More Details Get Financing

Get a Quote

Name
First Last
Email
Phone
Product Name*
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
Comments/Questions

Arena Drags

Get a Quote

Arena Drags

Get a Quote

Industrial Ceiling Fans

Get a Quote

Industrial Ceiling Fans

Get a Quote

Industrial Ceiling Fans

Get a Quote

Industrial Ceiling Fans

Get a Quote

Priefert Horse Walkers

Get a Quote

Priefert Horse Walkers

Get a Quote

Priefert Horse Walkers

Get a Quote

ProWalk Horse Walkers

Get a Quote

ProWalk Horse Walkers

Get a Quote

ProWalk Horse Walkers

Get a Quote

ProWalk Horse Walkers

Get a Quote

ProWalk Horse Walkers

Get a Quote

Conestoga Manure Spreaders

Get a Quote

Conestoga Manure Spreaders

Get a Quote

Conestoga Manure Spreaders

Get a Quote

Conestoga Manure Spreaders

Get a Quote

Conestoga Manure Spreaders

Get a Quote

Priefert Horse Walkers

Get a Quote

Arena Drags

Get a Quote

Water Tank Trailer

Get a Quote

Water Tank Trailer

Get a Quote

Water Tank Trailer

Get a Quote

Water Tank Trailer

Get a Quote

Water Tank Trailer

Get a Quote

LOCATION

PHONE

FAX